Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

Getting Started

The Getting Started tasks guide you through the basic setup, configuration, and use of Security Analysis Solution.

Prerequisites for Getting Started Tasks
  • Launch the Arellia Security Manager
    • Start Menu > Arellia > Arellia Security Manager
    • You may be prompted to install the Microsoft Silverlight plug-in. This is required for Arellia products.
  • Home page and First-Time Setup
    • You will see a list of recommendations.
    • Check the box next to the configuration recommendations you would like to apply to the system, depending on the environment choice on the left.

NOTE:   You must enable the Security Analysis Agent Install policy to perform computer assessment tasks. We also recommend enabling the Local Security Agent which is used to perform many remediation tasks.

  • Click Perform Selected Actions
  • Importing SCAP Content
    • Click on the Profiles tab at the top (below the title).
    • Click Download Profiles... in the Actions section on lower left.
    • Locate the system profiles and check the box to select them for import.

NOTE:   Some profiles have multiple versions listed, depending on which version of the OVAL specification you're interested in analyzing. If unsure, just select the newest version (typically, you don't need more than one version of each profile).

This process could take anywhere from 5 to 90 minutes, depending on the load on the server and the number of profiles selected. For evaluation or demonstration purposes, we recommend you initially select only one or two profiles.

  • Click the Import Profiles button to start the import process.
Getting Started Tasks
  • No labels